Download

Link 1 RPiSAP rev0 20161011 - download


Important note:

After you write the image to SD/microSD, you will have 100MByte available space. Make sure your total mp3 size on USB drive not reach maximum 100MByte before plug it to RPiSAP.

Anyway you can expand your file space following this step,

1. Write RPiSAP image to SD/microSD.

2. Plug SD/microSD to RPiSAP then apply power.

3. Wait until PAUSE status appears on LCD. If you not using LCD, let until green led on the RPiSAP stop blinking continuously.

4. Push POWER switch continuously more than 5 seconds.

5. Wait until RPiSAP reboot and PAUSE status appears on LCD.

6. Finish.

If you are using 2GB SD/microSD, you will have 950MB available space. You can add total mp3 size to 950MB on your USB drive.

If you are using 4GB SD/microSD, you will have 2785MB(2.78GB) available space. You can add total mp3 size up to 2785MB on your USB drive.

And so on you will have about 75% available space from total size of your SD/microSD.